top of page
Metal Roof Pipe Flashing

Pipe Flashing for Corrugated Roof #1

SKU: Flash-Cor-1
€32.00Price
Pipe Size: 76mm - 152mm
Designed to weatherproof twin wall chimney flues, boiler flues, soil pipe flashings, stove pipe flashings and vent pipe flashings for metal roofs. Suitable for profiled sheeting and flat panel surfaces. Can also be used on Metal, Plastic, Polycarbonate or Glass Roofs, corrugated sheeting and flat panel surfaces.
Temperature resistance up to 135C.
Quantity

  • Description

    Made of EPDM, these flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light.
    The one piece construction allows for quick and easy on-site installation - usually taking no longer than five minutes.
    The base is designed to form a seal on most panel configurations and roof pitches regardless of pipe location.

  • Tech Spec

    • EPDM Rubber
    • Hole Size 76mm-152mm
    • Base Size 250 x 250mm
    • Pitch 0-18°
    • Continious temperature resistance -50C to +115C
    • Maximum short term temperature +135C

  • Installation

    1. Choose pipe opening and trim using a stanley knife or scissors.
    2.  Slide flashing over pipe (you may need to lubricate the flashing with some grease).
    3. Form the flashing to the same profile as the roof.
    4. Apply sealant on the underside
    5. Fasten using the tec-screws and caps 
bottom of page