top of page
Enamel Black 45 degree Bend

Matt Black Stove Pipe Bend 45 Degree

SKU: 45-bend
€48.00Price
Vitreous Enamelled Matt Black Stove Pipe Bend 45/135 Degree. Finished products have an internal and external vitreous enamel coating to offer extremely high resistance to heat and toxic or corrosive gases.
Quantity
  • Description

    Representing the highest level of quality, 1.2mm low grade carbon steel is laser-welding ensures the steel pipes perfect welding. Subsequent internal/external vitreous enamel coating baked to 850°C provides exceptional resistance against corrosion by combustion condensate. V2 test results specified by corrosion resistance Standard 1856-2 show that Plus flue pipes have a significantly longer duration than normally painted 2 mm thick pipes that have not received internal vitreous enamel coating.
    They are perfectly resistant even to extreme situations such as soot-fire (a fire that occurs inside the pipe) without being damaged or modified.

  • Applications

    Our products are suitable for oil, gas and solid fuels, for domestic heating appliances, pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System.

  • Installation

      • Should not be within 450mm from combustible material, e.g. wood, plaster boards, etc.
      • When installing make sure the flue is installed the correct way up - the smaller diameter should always be pointing downward.
      • Friction fit joint so dose not require sealing of the joints, For extra security if desired each joint could be coated with a jointing compound (fire cement or high temperature silicone sealant).This makes sure that no condensate can escape and spoil the appearance of the pipe.
      • Can be cut, but care must be taken to cover any exposed steel with high tempter paint as this will rust over time.
bottom of page